(Retail/Wholesale welcome)

 BioNatro T1® Nano Fabric Stain Repellent Coating is a protective coating formed using a fluoropolymer with excellent stain and oil repellency. It is specifically designed for waterproofing, stain resistance, and scale prevention in fabrics. Its characteristics include non-absorption of moisture, extremely low coefficient of friction, good weather resistance, and leaves no residue after spraying, without affecting the fabric's texture, breathability, or durability. The coating is suitable for fleece, leather, wool, cotton, synthetic fabrics, silk, and more.

 The technology uses a nano-scale water- and oil-resistant protective mesh composed of fluoropolymers, forming an invisible barrier to repel water and other liquids and prevent them from penetrating the surface. This protective mesh also protects against liquid-soluble contaminants. When liquid is splashed onto the coating, it is immediately "slid off," creating a "lotus effect." It can be easily removed with a gentle shake or by blotting with a tissue, without seeping into the fabric and causing stains.

 Fabrics coated with the coating can still be machine washed directly. If washed frequently, the coating effect can last for about six months, and up to a year on fabrics that do not require washing.

 How to use:
 Before spraying, thoroughly clean the fabric and ensure it is completely dry. Shake the BioNatro® Nano Fabric Anti-Stain Coating evenly onto the surface using a sprayer held approximately 20cm away. Spraying too far or too close will result in unsatisfactory results. (Note: Do not spray too much to avoid dripping). Wait 5-10 minutes for it to partially dry, then repeat the spraying process for longer-lasting effects. Allow to air dry in a well-ventilated area for 24 hours; do not touch during this time. The effect lasts 6-12 months; daily cleaning with water is sufficient for stain prevention. Use outdoors or in a well-ventilated area.

 warn:
 For safety reasons, wear protective equipment such as gloves, goggles, and a mask when using this product to avoid contact with eyes and skin. If contact occurs, immediately rinse with water for at least 15 minutes. If irritation persists, seek medical attention immediately. This product is flammable; do not eat or smoke while using it. Wash hands thoroughly after use.

 Active ingredient:
 Fluoropolymers, ethyl acetate

 save:
 This product is flammable and highly volatile. It must be stored in a cool, dry, well-ventilated place, especially away from heat sources, sparks and flames. Avoid inhaling its vapors and direct sunlight. It is recommended to store it between 5°C and 40°C and avoid direct sunlight.

 After receiving payment for your order, we will ship it via SF Express. You can usually receive the product within 2-4 business days.