3M Special Durable Decorative Film (Full Roll 50m x 1.22m)
3M Di-Noc™

3M™ DI-NOC™ Decorative Film Professional Adhesive has an exhaust duct design, which facilitates the exhaust of gas during application, reduces the generation of bubbles, and greatly improves construction efficiency. It not only eliminates the longer construction time and subsequent maintenance problems required when using natural materials, but also has the same noble material presentation. It can also self-superimpose advantages to create the most perfect space in the shortest time.

The patterns used in the Tenai decorative film are very realistic in design, aiming to simulate the appearance of natural materials such as wood, stone, metal, etc. The decorative film is highly realistic in both visual and tactile aspects. Its simulated wood grain, marble grain or other textures use professional light-controlling reflection and matte coating technology combined with exquisite deep embossed wood grain and marble grain and high-quality printing to present high-fidelity tones and textures, which can achieve a fake effect and make the surface more beautiful. For the wood grain series, it is really difficult to tell the difference between the Tenai decorative film and ordinary wood veneer with the naked eye unless you touch it with your hands. The realistic printed texture is matched with the matte coating technology, and the texture is excellent.

3M DI-NOC™ decorative film uses special surface matte coating technology to significantly reduce the glare of sunlight. It has anti-UV properties that can block 99% of ultraviolet rays, reduce the damage of sunlight to the skin, and slow down the aging and fading of furniture , while retaining the original light-transmitting and clear feeling of glass .

3M DI-NOC™ Decorative Film is a special decorative soft film that is dust-free, wood dust-free, flame-resistant and formaldehyde-free. It has passed the SGS formaldehyde-free test certification , so users can rest assured.

3M™ DI-NOC™ Specially Resistant Decorative Film has been certified both domestically and internationally as a flame-resistant and fire-resistant safety material, including compliance with domestic Class 1 flame-resistant certification and Japan non-combustible certification .

After testing , the adhesion of DI-NOC™ decorative film was left in an environment of 45°C and 90% humidity for 30 consecutive days , and the results showed no change.

After testing , the adhesion of DI-NOC™ decorative film was found to be unchanged after being placed at a high temperature of 65° for 30 consecutive days .

1. Recommended product application temperature range: 15°C ~38°C.

2. Operating environment: Avoid normal use in liquid immersion, high temperature (50 °C) and high humidity environments.

3. The construction substrate must be clean and dry.

4. If the substrate itself has water seepage or other defects, it may cause the adhesion to decrease.

5. Do not use strong acid or strong alkaline cleaners (pH 6~8) on the surface.

6. Time required to reach the maximum adhesion strength after construction: at least 3 to 7 days, depending on the substrate or environment.

7. Do not use hard or abrasive materials to clean the surface.

8. The substrate will have different adhesion strengths due to different surfaces. For example, calcium silicate board and Liguang board can be used with an adhesion promoter to achieve good adhesion.

9. Construction method: dry paste (except DG series).

* Note: Removing DI-NOCTM Special Resistant Decorative Soft Film from gypsum board, calcium silicate board, plywood or MDF substrates will cause surface damage.

Please avoid excessive humidity or direct sunlight, store in a clean place at room temperature below 32°C, and use within two years.